Heater Black
Black Water Heater Oven Accessories Anti-Dry Knob Thermostat Temperature Controller Switch 30-110 Degrees
Price
$4.03
Secure Rocket Network checkout
Description
Specifications: 30-110 degrees
Contact capacity: 250V/16A national standard (can directly control 3000W power)
Total number of terminals: 3 (normally closed and normally open)
Electrical performance: 16 (3) A-250V ~ 10 (1.8) A-400V ~
Disconnect temperature: according to user requirements, temperature design range (-35 ° C ~ +400 ° C)
Product life: >100,000 times
Electrical strength: AC2000V/1min
Normal insulation resistance: ≥100MΩ
Contact resistance: ≤50mΩ
Tidal insulation resistance: ≥10MΩ
Temperature response rate: ≤1.0°C/min
Rated voltage: 220 (V)
Small current: 200mA
Feature:
Uses: Suitable for any occasions and equipment using temperature control, heating and cooling principle conversion, mainly used in home appliance industry (shower, drum type washing machine, heater), electric heating equipment (stainless steel automatic water heater, electric fryer, Food machinery, medical equipment), refrigeration industry (kitchen freezer, fresh cabinet, cold storage, ice machine, fish pond, cold drink machine, heating machine) and other temperature control
Wiring method:
The two-pin thermostat has 2 lugs, which are 1 and C. When 1 and C are connected in series on the power supply circuit and the temperature rises to the required control temperature, the power will be automatically cut off (the appliance stops working). When the temperature is lowered, the power will be automatically turned on (the appliance starts working)
The three-pin thermostat has three lugs, one for each of 1, 2, and C. When 1 and C are connected in series on the circuit, the reason is the same as above. When 2 and C are connected in series on the circuit and the temperature rises to the required control temperature, the power will be automatically turned on (the appliance starts working). when the temperature is lowered, the power will be automatically cut off (the appliance stops working)
Packing Include:
1* thermostat
Precautions:
1. The user must propose the order model and specifications according to the characteristics of the product and the temperature to be controlled.
2. When the thermostat is installed, the temperature sensing tube should be as close as possible to the temperature-controlled surface to achieve the purpose of accurate temperature control.
3. Do not deform the temperature tube during installation to avoid affecting its performance.
4. Do not allow conductive gas or conductive substances to enter the temperature controller or contaminate the surface of the temperature controller to avoid affecting the electrical insulation performance.
5, The M4 wire of the mounting bracket should not be too long, otherwise it will destroy the performance of the thermostat.
6, The switch box is electrical ceramic parts should be lightly handled to avoid damage.
7, The capillary bending radius can not be less than 5mm.
Product photos
Full images